当前位置：首页>日本横河YOKOGAWA
订购热线：Mechanical Relay Boards (Contact Output)
Models |
ARM55D |
ARM55W ARM55T (with switch) |
ARM55C |
Usage |
Mechanical Relay Dry Contact Output (“a” contact (NO)) (Single / Dual-redundant) |
Mechanical Relay Wet Contact Output (Single / Dual-redundant) AUTO/OFF/ON switch (only for ARM55T) |
Mechanical Relay Dry Contack Output (“a” contact or “b” contact (NO or NC)) (Single / Dual-redun or dant) (*6) |
Contact Points |
32-point |
32-point |
32-point |
Terminals for Field Device Connection |
M4 screws |
M4 screws |
M3.5 screws (*5) (M4 in power input part) |
Modules |
ADV551 (DO: 32-point) + ATD5A (Terminal block) ADV561 (DO: 64-point) (*1) |
ADV551 (DO: 32-point) + ATD5A (Terminal block) ADV561 (DO: 64-point) (*1) |
ADV551 (DO: 32-point) + ATD5A (Terminal block) ADV561 (DO: 64-point) (*1) |
Signal Cables |
AKB331 (for 32-point) AKB337 (for 64-point) |
AKB331 (for 32-point) AKB337 (for 64-point) |
AKB331 (for 32-point) AKB337 (for 64-point) |
Maximum Load (*2) |
250 V AC: 2 A per point 30 V DC: 2 A per point 125 V DC: 0.1 A per point (*3) |
250 V AC: 0.6 A per point 30 V DC: 0.6 A per point 125 V DC: 0.1 A per point (*3) |
30 V DC: 1.5 A per point |
Minimum Load |
5 V, 10 mA |
5 V, 10 mA |
5 V, 10 mA |
Power Supply Voltage and Current Consumption of Internal Circuit (require external power supply) |
24 V DC Max. 0.65 A |
24 V DC Max. 0.65 A |
24 V DC Max. 0.85 A |
Power Supply for Field Device (require external power supply) |
- |
Dual-line (supply power per 16- point) 250 V AC: Max. 9.6 A 30 V DC: Max. 9.6 A 125 V DC: Max. 1.6 A |
- |
Insulation Resistance |
At least 10 MΩ (500 V DC) |
At least 10 MΩ (500 V DC) |
At least 10 MΩ (500 V DC) |
Withstanding Voltage |
Between field device terminals and cases: 2 kV Between 24 V power terminals and cases: 500 V Between 24 V power terminals and field device terminals: 2 kV |
Between field device terminals and cases: 2 kV Between 24 V power terminals and cases: 500 V Between 24 V power terminals and field device terminals: 2 kV |
Between field device terminals and cases: 2 kV Between 24 V power terminals and cases: 500 V Between 24 V power terminals and field device terminals: 2 kV |
Ambient Temperature and Humidity |
0 to 50 °C, 10 to 90 %RH |
0 to 50 °C, 10 to 90 %RH |
0 to 50 °C, 10 to 90 %RH |
Standards |
Safety Standard [CSA] (*3) EMC standards [CE Marking], [C-Tick Marking], [KC Marking] |
Safety Standard [CSA] (*3) EMC standards [CE Marking], [C-Tick Marking], [KC Marking] |
EMC standards [CE Marking], [C-Tick Marking], [KC Marking] (*4) |
Size |
W: 482.6 mm x H: 132.5 mm (3U) |
W: 482.6 mm x H: 177 mm (4U) |
W: 482.6 mm x H: 132.5 mm (3U) |
Weight |
2.2 kg |
2.6 kg |
2.2 kg |
*1: Two sets of relay board (ARM55D, ARM55W, ARM55T, or ARM55C) and two sets of signal cable (AKB337) are required for one ADV561.
*2: For inductive loads, connect a spark killer (CR network for AC; diode for DC) in parallel with loads.
*3: For DC, 30 V or less is the requirement for the Safety Standard [CSA].
*4: ARM55C does not conform to Safety Standard [CSA].
DCS培训教材：
CS3000系统操作说明
每台HIS在启动后会自动以操作员权限登录，登录后一般都会有一个根据组态而出现的总貌画面。操作员可以使用总貌中的链接进入所在工段，也可以用操作员键盘快捷键进入所在工段。
1．名词解释：
1.1过程报.警（Process Alarm）：过程报.警该钮显亮，点击出现报.警信息的窗口。
1.2系统报.警(System Alarm)：系统报.警时，该钮闪亮，点击弹出系统报.警信息窗口。
1.3操作员指导信息(Operator Guide Message)：有操作员指导信息时，该钮闪亮，点击弹出指导信息窗口。
1.4 登录信息(User In Monitor)：设置用户身份。
1.5 窗口调用菜单(Window Call Menu)：调用各种画面。
1.6 操作菜单(Operation Menu)：相关流程图切换按钮。
1.7 预设窗口菜单(Preset Window Menu)：调用预先设置的画面。
1.8 工具条(Toolbox)：显示常用工具条。
1.9画面导航器(Navigator)：各种画面管理器。
1.10名称输入(Name Input)：直接输入仪表位号或画面名称调用画面。
1.11画面切换(Circulate)：在系统画面与通用程序间切换。
1.12清屏(Clear)：关闭所有系统画面。
1.13消音：消除报.警声。
1.14拷贝(Copy)：打印屏幕上任何东西。
1.15 OK：确认。
