当前位置：首页>日本横河YOKOGAWA
订购热线：Solid State Relay Boards (Voltage Input)
Models |
ARS15M-1 (100 V AC), ARS15M-2 (220 V AC), ARS15M-3 (10 - 30 V DC) |
Usage |
Solid State Relay Voltage Input, Module type (Single / Dual-redundant) |
Contact Points |
32-point |
Terminals for Field Device Connection |
Pressure clamp terminals Cable specifications: see the table of terminal treatment for the pressure clamp terminal signal line and power line. |
Modules |
ADV151 (DI: 32-point) + ATD5A (Terminal block) ADV161 (DI: 64-point) (*1) |
Signal Cables |
AKB331 (for 32-point) AKB337 (for 64-point) |
Contact Input Signal |
ARS15M-1 (100 V AC) ON signal: 90 to 140 V AC OFF signal: 45 V AC or less ARS15M-2 (220 V AC) ON signal: 180 to 250 V AC OFF signal: 45 V AC or less ARS15M-3 (10 - 30 V DC) ON signal: 10 to 30 V DC OFF signal: 1 V DC or less |
External Contact Rating |
- |
Power Supply Voltage and Current Consumption of Internal Circuit (require external power supply) |
24 V DC Max. 1.0 A |
Power Supply for Field Device |
- |
Insulation Resistance |
At least 10 MΩ (500 V DC) |
Withstanding Voltage |
Between 24 V power terminals and field device terminals: 2 kV |
Ambient Temperature and Humidity |
0 to 50 °C, 10 to 90 %RH |
Standards |
Safety standard [CSA], EMC standards [CE Marking], [C-Tick Marking], [KC Marking] |
Size |
W: 436 mm x H: 125.4 mm |
Weight |
3.0 kg |
*1: Two sets of relay board (ARS15M-1, ARS15M-2, or ARS15M-3) and two sets of signal cable (AKB337) are required for one
ADV161.
Solid State Relay Boards (Contact Input)
Models |
ARS15B-5 (48 V DC), ARS15B-6 (110 V DC) |
Usage |
Solid State Relay Contact Input (Single / Dual-redundant) |
Contact Points |
32-point |
Terminals for Field Device Connection |
M4 screws |
Modules |
ADV151 (DI: 32-point) + ATD5A (Terminal block) ADV161 (DI: 64-point) (*1) |
Signal Cables |
AKB331 (for 32-point) AKB337 (for 64-point) |
Contact Input Signal |
ON signal: 200 Ω or less OFF signal: At least 200 kΩ |
External Contact Rating |
ARS15B-5 (48 V DC): At least 60 V DC, 20 mA ARS15B-6 (110 V DC): At least 140 V DC, 20 mA |
Power Supply Voltage and Current Consumption of Internal Circuit (require external power supply) |
24 V DC Max. 0.32 A |
Power Supply for Field Device (require external power supply) |
Dual-line (supply power per 32-point) ARS15B-5 (48 V DC): 48 V DC; Max. 0.5 A per one line ARS15B-6 (110 V DC): 110 V DC; Max. 0.4 A per one line |
Insulation Resistance |
At least 10 MΩ (500 V DC) |
Withstanding Voltage |
Between field device terminals and cases: 2 kV Between 24 V power terminals and cases: 500 V Between 24 V power terminals and field device terminals: 2 kV |
Ambient Temperature and Humidity |
0 to 50 °C, 10 to 90 %RH |
Standards |
Safety standard [CSA] (*2), EMC standards [CE Marking], [C-Tick Marking], [KC Marking] |
Size |
W: 482.6 mm x H: 132.5 mm (3U) |
Weight |
2.5 kg |
*1: Two sets of relay board (ARS15B-5, or ARS15B-6) and two sets of signal cable (AKB337) are required for one ADV161.
*2: ARS15B-5 does not conform to Safety Standard [CSA].
五、工程能力
新添加的各种性能强化了工程能力，可以满足工程各阶段的要求，从系统调查到设计阶段，再从制造到测试系统阶段。CENTUM CS系统提供出色的工程功能和方便的工程环境。
标准界面
UNIX操作系统下，在工程平台中应用了工业中标准的图形用户界面Motif。组态画面的显示和应用均为标准化，这样工程组态就变得非常简便。
GUI: 图形用户界面
工程操作简便
在图形组态、控制图组态和逻辑图组态中，使用鼠标绘制控件，在可视环境中设定属性，而且可以从预置的字符串、值或FIF(空框架)中选择组态设定。
并行作业
为了进行高效的工程作业，可以实现多个EWS连接一个系统数据库。每个数据库的独占访问杜绝了双重修改。
可视化测试功能
在EWS上搭建FCS(Field Control Station 现场控制站)。可以在这种测试环境下测试FCS的控制功能以及HMI的操作监.视功能。这样可以在没有FCS硬件的情况下进行调试，还可以进行部分应用测试，大大缩短了工程的时间。在系统扩展与改动时，还可以在不影响工厂运行的情况下对操作进行测试和确认。
在线维护
无需停止FCS即可修改FCS应用软件，而且不会对变更部分以外的控制功能产生影响。此外，ICS还可以在线反映变更状况。
ARS15M-310端子板
