华伦康盛科技(深圳)有限公司
全国服务热线
13530116378
    供应分类
    华伦康盛科技(深圳)有限公司
    联系人:魏彬
    手 机:13530116378
    电 话:0755-28122231
    传 真:0755-28157773
    邮 箱:hlks11@163.com
    地 址: 深圳市龙华区大浪街道陶元社区佳利科技大厦2楼
    供应详情

    当前位置:首页>日本横河YOKOGAWA

    ALR111-S50通信模块

    类别: 日本横河YOKOGAWA
    发布时间: 2021-03-13 10:28:16
    价格: ¥0
    发送联系信息 订购热线:13530116378
    详情

    横河ALR111-S50通信模块ALR111-S50通信模块
    HARDWARE SPECIFICATIONS

    The serial communication modules (ALR111 and ALR121) hardware specifications are as shown below.

     

    Table  Serial Communication Module Hardware Specifications

     

    Item

    Specifications

    Model

    ALR111

    ALR121

    Interface

    RS-232C

    RS-422/RS-485

     

    Connection method

     

    Point-to-point

    Point-to-point (RS-422) Multipoint (RS-485)

    Communication function

    Half-duplex

    Synchronization method

    Start-stop synchronization

    Transmission speed

    1200/2400/4800/9600/19200/38400 bps (*1)

    Transmission code

    ASCII/binary

    Character length

    7/8 bits

    Stop bit length

    1/2 bits

    Parity check

    None/even/odd

    Lag time after data transmission

    1 ms (The lag time to start receiving data again after data transmission.)

    Transmission distance

    Maximum 15 m

    Maximum 1200 m (total extended length)

    Installation method

    Mounted on ANB10£, ANB11£, ANR10£, AFF50£, AFV10£, AFV30£, or AFV40£

    I/O wiring

    AKB131, AKB132, AKB133, AKB134 cables, etc.

    Cable with 3-pair shield, AKB161, or AKB162

     

    Wiring connection

     

    D-sub-9-pin (female x 2)

    Clamped with terminal blocks M4 screws

    (5 poles x 2)

    Current consumption

    0.5A

    Weight

    0.3 kg

    0.3 kg

    *1:     The applicable transmission speed depends on the communication function, subsystems, and connection method.

     

    An FCS collects data from subsystems or sets data with control calculations to subsystems using the builder functions by way of serial communication modules. A communication module selects only one communication function, thus

    two ports must have identical communication functions.  It is not possible to select different communication function for every port. The communication functions and those transmission speeds for each communication module are as shown in the table below.

     

    Table  Communication Functions for Communication Modules

     

    Communication function

    ALR111

    ALR121

    FA-M3 communication

    DR

    DR

    Modbus communication

    DR

    DR

    MELSEC-A communication

    DR

    DR

    YS communication with direct connection

    NIL

    SG

    YS communication

    NIL

    SG

    SLC500 communication

    SG

    SG

    ALR111-S50通信模块

    在线订购

    姓名
    手机号
    数量
    电话
    邮箱
    单位
    备注
    客服 0755-28122231
    手机网站
    在线咨询
    服务热线
    0755-28122231
    13530116378