横河AMC80输入输出模块AMC80

AMN11 模拟输入/输出模块箱
AMN12 快速模拟输入/输出模块箱
AMN21 继电器输入/输出模块箱
AMN31 输入/输出端子模块箱
AMN32 输入/输出接插件模块箱
AMN33 通信模块箱
AMN34 多点控制模拟输入/输出模块箱
AAM10 电流/电压输入模块
AAM11 电流/电压输入模块
AAM11B 电流/电压输入模块(支持 BRAIN)
AAM21 mV，热电偶和 RTS 输入模块
AAM21J mV，热电偶和 RTS 输入模块(符合 IEC584-1995，IEC751-1995)
APM11 脉冲输入模块
AAM50 电流输出模块
AAM51 电流/电压输出模块
AMM12T 电压输入多路变换器模块(16 点，端子型)
AMM12C 电压输入多路变换器模块(16 点，接插件型)
AMM22M mV 输入多路变换器模块(16 点，端子型)
AMM22T 热电偶输入多路变换器模块(16 点，接插件型)
AMM22TJ 热电偶输入多路变换器模块(16 点，端子型，符合 IEC584-1995)
AMM22C mV 输入多路变换器模块(16 点，接插件型)
AMM32T RTD 输入多路变换器模块(16 点，端子型)
AMM32TJ RTD 输入多路变换器模块(16 点，端子型，符合 IEC751-1995)
AMM32C RTD 输入多路变换器模块(16 点，接插件型)
AMM32CJ RTD 输入多路变换器模块(16 点，接插件型，符合 IEC751-1995)
AMM42T 2 线制变送器输入多路变换器模块(16 点，端子型)
AMM52T 电流输出多路变换器模块(16 点，端子型)
ADM11T 接点输入模块(16 点，端子型)
ADM11C 接点输入模块(16 点，接插件型)
ADM12T 接点输入模块(32 点，端子型)
ADM12C 接点输入模块(32 点，接插件型)
ADM51T-1
ADM51T-2 接点输出模块(16 点，端子型)
ADM51C-1
ADM51C-2 接点输出模块(16 点，接插件型)
ADM52T-1
ADM52T-2 接点输出模块(32 点，端子型)
ADM52C-1
ADM52C-2 接点输出模块(32 点，接插件型)
ADM15R 继电器输入模块(16 点，端子型)
ADM55R-1
ADM55R-2 继电器输出模块(16 点，端子型)
ACM11 RS-232C 通信模块
ACM12 RS-422/RS-485 通信模块
ACF11 现场总线通信模块
AMC80 多点控制模拟输入/输出模块

AMC80   多点控制模拟输入/输出模块

Multipoint Control Analog I/O Module

This module controls 8-point analog loop.  It can be made redundant.

	Item	Specifications
	Model	AMC80
Input	No. of input points	8
	Input signal	1 to 5 V DC (differential, non-isolated inputs)
	Input resistance	500 kΩ or more (at power-up)/100 kΩ or more (at power-down)
	Allowable input voltage	-30 to 30 V DC
	Accuracy	± 4 mV
	Effect of ambient temperature change	For 10 °C change: ±8 mV
	Input data update period	45 ms
	Step response time	300 ms
	Input signal isolation	No isolation between system and field, and between channels
	Allowable common mode voltage	±5 V or less
Output	No. of output points	8
	Output signal	4 to 20 mA DC
	Output resistance	500 kΩ or more
	Allowable load resistance	0 to 750 Ω
	Output range	1.25 to 22 mA
	Output current	25.5 V DC or less
	Output open detection	0.65 mA or less
	Output accuracy	± 48 µA
	Effect of ambient temperature change	For 10 °C change: ±32 µA
	Output data update period	45 ms
	Output step response	100 ms
	Output signal isolation	No isolation between system and field, and between channels
	Current consumption	2 A or less (5 V DC)
	How installed	Installed in the AMN34 Nest for Multipoint Control Analog I/O Modules
	Wiring	KS1 cable

横河AMC80输入输出模块AMC80