ALE111-S00 ALE111-S01   以太网通信模块

MELSEC Communication

Connected device:

-  Q Series built-in Ethernet port CPU (10BASE-T, 100BASE-TX)

Q03UDE, Q04UDEH, Q06UDEH, Q10UDEH, Q13UDEH, Q20UDEH, Q26UDEH, 50UDEH, Q100UDEH

-  Ethernet interface module

A Series:

AJ71E71-S3 (10BASE-2/5), A1SJ71E71-B2-S3 (10BASE-2), A1SJ71E71-B5-S3 (10BASE-5), AJ71E71N-B2 (10BASE-2), AJ71E71N-B5 (10BASE-5), AJ71E71N-T (10BASE-T), AJ71E71N3-T (10BASE-T), A1SJ71E71N-B2 (10BASE-2), A1SJ71E71N-B5 (10BASE-5), A1SJ71E71N-T (10BASE-T), A1SJ71E71N3-T (10BASE-T)

QnA Series:

AJ71QE71 (10BASE-2/5), AJ71QE71-B5 (10BASE-5), A1SJ71QE71-B2 (10BASE-2), A1SJ71QE71-B5 (10BASE-5), AJ71QE71N-B2 (10BASE-2) AJ71QE71N-B5 (10BASE-5), AJ71QE71N-T (10BASE-T), AJ71QE71N3-T (10BASE-T), A1SJ71QE71N-B2 (10BASE-2), A1SJ71QE71N-B5 (10BASE-5), A1SJ71QE71N-T (10BASE-T), A1SJ71QE71N3-T (10BASE-T) Q Series:

QJ71E71 (10BASE-T/5), QJ71E71-B2 (10BASE-2), QJ71E71-B5 (10BASE-5), QJ71E71-100 (10BASE-T, 100BASE-TX)

Connection method:  Ethernet connection via a hub.  The communication via MELSECNET is not accessible. Applicable devices:  Q series built-in Ethernet port CPU and the A, QnA, and Q series that can be used with the above Ethernet interface modules. (*1)

Transmission protocol:

A series: A-compatible 1E frame

QnA, Q series (except Ethernet port of the built-in Ethernet port CPU): 

QnA-compatible 3E frame, A-compatible 1E frame (*2)

Q series (Ethernet port of the built-in Ethernet port CPU):  QnA-compatible 3E frame

No. of subsystem stations:  Max. 30 stations/ALE111

Communication protocol:  TCP/IP

*1:  For the communication using A series and QnA series Ethernet interface module, a ladder program is required for MELSEC side for Ethernet interface module parameters setting, etc.  For details, please refer to the MELSEC’s instruction manual(s).

*2:  Both the A-compatible 1E frame and the QnA-compatible 3E frame can be used at the same time by each communication receiver.