Items                                                                                       Specifications

Model                                                                                                          AAM11, AAM11B

Input signal                                 0 to 10 V DC                                                          0 to 20 mA DC (*1) (*2)

(It is possible to supply power to a transmitter.)

Input resistance                         1 MΩ at power-up (100 kΩ at power-down)        250 Ω

Allowable input voltage/current  -10 to 30 V DC                                                     40 mA DC or less

Supplying power to transmitter                                       -                                        25.0 to 25.5 V DC (Output current limit: 60 mA DC

or less )

Auxiliary voltage output             1 to 5 V DC; Output resistance: 1 Ω or less;

Allowable load resistance: 10 kΩ or more; Signal ground is shared with system

Square root extraction               Specify whether to use square root extraction.

Accuracy                                   Voltage input: _4 mV;    Current input: _16 _A; Auxiliary voltage output: _12 mV

For 10 _C change:

Effect of ambient temperature       Voltage input: _4 mV + _ 0.15 % of specified value

change                                          Current input: _32 _A

Auxiliary voltage output: _24 mV

Data update period                    50 ms

Current consumption                 300 mA or less (5.0 V DC)

Signal isolation                           Input signals are isolated between systems

Withstanding voltage: 1500 V AC/min

How installed                             Installed in the I/O Module Nest

How connected                         Connected to the terminals of the I/O Module Nest with M4 screws

How input signals are specified  Specify input signals and range by software setting.

*1:  This module can be combined with MTL barrier 728.  In this case, wiring resistance must be 10 Ω or less and the minimum operating voltage of the 2-wire transmitter must be 12 V DC or less.

*2:  When the power of AAM11 is OFF or an abnormal condition occurs, the current input loop is open. Do not share current signals with other receivers. To share signal, attach Shunt Resistance (250 Ω) to current-output module and share voltage output.

 数字输入输出模块：
ADM11T  接点输入模块 16点端子型
ADM12T  接点输入模块 32点端子型
ADM51T  接点输出模块  16点端子型
ADM52T  接点输出模块  32点端子型